WheelhouseCycles

Check tire pressure, check torque of fasteners, check and adjust brakes (manual)

Check tires for safety, inflate tires to proper pressure, inspect headset, pedals, chain (+lube), brakes, check nuts and bolts for proper torque. Service applies to kids bikes with no suspension, or shifting capabilities.

Comprehensive safety inspection, front and rear shifting and brake adjustments, bolt torque check, lateral wheel truing in-stand, and full drivetrain lubrication.

Basic Tune-Up plus full drivetrain deep-clean (chain, cassette, and crankset cleaned in solvent tank), radial wheel truing, and hub bearing adjustment.

Standard Tune-Up plus complete frame and component strip-down. Deep clean, repack or replace all cartridge/loose bearings, install brand new premium inner cables and outers, and complete component rebuild.

Tube inspection, debris clearance, and rim strip check. Tube not included. (Prices are per wheel)

Tire installation and seating. Price does not include tire. New tube suggested. (Prices are per wheel)

Lateral wheel alignment and spoke tension check. For most aluminum wheels with external nipples. (Prices are per wheel)

Lateral wheel alignment and spoke tension check. For most carbon wheels with external nipples. (Prices are per wheel)

Adjust hub bearings to remove side-to-side play and optimize rolling efficiency. (Prices are per wheel)

Disassemble hub, degrease, inspect bearing surfaces, and repack with fresh grease. Does not include bearings if needed. (Prices are per wheel)

Replace broken spoke(s), re-tension wheel, and align laterally. Price does not include spokes, nipples or rim tape. Due to the variations in spoke type, and length, spokes will need to be ordered once spoke type and length are determined. (Prices are per wheel)

Full tubeless conversion/setup. Does not include valve stem, tape or sealant. (Prices are per wheel)

Inspection of existing tire and clean injection of fresh tubeless sealant. Does not include sealant. (Prices are per wheel)

Remove old cups, face frame headtube if needed, install new headset, and grease bearing races. Price does not include bearings.

Drop lowers, clean stanchions, change wiper seals, inspect bushings, and refill oil volume. Price does not include rebuild kit.

Cut steerer tube, install crown race, press star nut, and grease headset. Does not include bearings.

Inspect stack height, re-grease top cap assembly, and torque steering compression bolt to remove play.

Removal and remounting of grips, levers, shifters, and computer mounts with standard external routing.

Clean routing of control lines inside carbon or aluminum handlebars. May require new brake and shifter lines, housings, cables, etc.

Clean adhesive off handlebars and wrap high-quality bar tape. Does not include bar tape.

Safe removal of old handlebar grips and clean installation of new lock-on or slip-on grips.

Replace worn brake pads, inspect braking surface, and align caliper. (Price is labor only per wheel, parts are additional.)

Mechanical cable tension check, caliper alignment, and pad clearance adjustment. (Price is labor only per wheel, parts are additional.)

Fresh shift or brake cable and housing installation with external routing. (Price is labor only per wheel, parts are additional.)

Fresh internal routing of shift or brake lines and housing. (Price is labor only per wheel, parts are additional.)

Standard flat bar brake lever replacement, adjustment, and tuning.

Road drop bar brake lever/shifter replacement. Will require new bar tape.

Full hydraulic fluid flush. (Price is labor only per wheel, parts are additional.)

Inspect rotor with alignment tool, adjust runout, and eliminate pad contact.(Price is labor only per wheel, parts are additional.)

Hydraulic caliper degrease, piston retraction, new pad fitment, and bedding.(Price is labor only per wheel, parts are additional.)

Hydraulic hose replacement with external frame routing.(Price is labor only per wheel, parts are additional.)

Hydraulic hose replacement with internal frame routing.(Price is labor only per wheel, parts are additional.)

Careful alignment of hydraulic calipers to eliminate rotor rub. (Price is labor only per wheel, parts are additional.)

Removal of crankset, old bottom bracket cleanup, frame shell treatment, and fresh bottom bracket installation.

Face bottm braket or chase threads or headtube facing to ensure perfect alignment of bearings.

Crankset inspection and chainring replacement. Retorque bolts to factory specifications.

Thread cleanup, spindle grease lubrication, and torque install of pedals.

Clean derailleur pivot, set upper/lower travel limit screws, and calibrate cable tension.

Align derailleur hanger, reset limit screws, adjust B-tension, and calibrate shifting index.

Surface solvent drivetrain spray, wipe-down, chain inspection, and premium chain lubrication.

Size chain properly, and install.

Position, clamp align, wire, and complete calibration of a front derailleur.

Realignment of the rear derailleur hanger using an alignment gauge, plus derailleur mounting and tune.

Standard cleaning, air sleeve seal replacement, and air pressure recharge. Price does not include seals or modifications to travel, etc.

Remove existing lockring and sprocket cluster, clean freehub splines, and torque-mount new cassette.

Wipe seat tube, carbon prep or grease frame interface, fit post, and adjust height.

Removal of saddle, clamp lubrication, new saddle install, and level-calibration check.

Comprehensive assembly from factory crate. Wheel truing, brake/gear alignment, safe grease lube, and safety certification.

Full assembly from factory crate, torque calibration, battery and computer system configuration.

Standard inner tube (650, 650b, 700c, 26", 27.5", etc.) for road, city, or casual wheels.

Standard mountain bike inner tube (26", 27.5", 29"). Specialty tube prices vary.